<!-- https://docs.youtarget.com/advertiser/en/cases/limits.html -->

# Limit budget and impression frequency

> Set the run period, daily and total budget, frequency per user and schedule.

## Goal

Do not spend more than planned: set the campaign run period, budget, frequency per user and ad hours.

## Before you start

- A campaign.
- A spend plan: how much you can spend in total and per day.

## Steps

1. Open the campaign and go to the **Limits** tab. Each block has its own toggle. If you turn the toggle off, the block's values are erased.
2. In the **Launch period** block, turn on the toggle and set the **Start** and **End** dates, then the **Time zone**.
3. In the **Budget** block, turn on the toggle and set the **Total**, **Per day** or **Per hour** limits. In the **Distribution** field, select **Evenly throughout the period** or **As fast as possible**. For the difference between the modes, see [Budget distribution](#budget-distribution).

   *Screenshot: The Launch period and Budget blocks*

4. If needed, limit **Clicks** and **Impressions** the same way: in total, per day and per hour. Enter a whole number from 1. Pop campaigns cannot have an impression limit: the **Impressions** block is on the tab, but you cannot save it.
5. In the **Frequency cap per user** block, turn on the toggle, select the **User tracking method** (**Cookie** or **IP + User-Agent**) and set the **Frequency Cap**: the number of impressions and an interval in minutes or hours. For example, if you set 3 impressions in 24 hours, one person sees the ad no more than three times a day. For how the platform recognizes the same person, see [Auction and bid](../concepts/auction.md#how-limits-and-frequency-are-counted).
6. In the **Scheduler** block, turn on the toggle, select a time zone and mark the ad hours. Click a cell to turn on that hour, a weekday to turn on the whole day, or an hour in the header to turn on that hour on all days. The **All**, **Weekdays**, **Weekends** and **Clear all** buttons fill the grid at once.
7. Click **Save limit settings**.

   *Screenshot: The Frequency cap per user and Scheduler blocks*

### Budget distribution

The **Distribution** field in the **Budget** block sets how the budget is spent:

- **As fast as possible**: the campaign buys every impression it wins until it reaches the limit.
- **Evenly throughout the period**: the platform spreads the budget over the whole launch period and takes into account the hours that usually have more traffic. This mode requires a **Total** limit and a launch period with both dates.

## Result

The message "Changes successfully saved" appears. Spend appears next to the budget, click and impression limits, for example "reached 37%".

In the **Campaigns** list, a speedometer icon in the campaign row shows how much is spent: green means up to a third of the limit, yellow up to two thirds, red more than that. Hover over the icon to see the period and progress for each limit.

*Screenshot: Speedometer tooltip in the campaign list*

### Campaign group limits

You can also set limits for a whole [campaign group](https://docs.youtarget.com/advertiser/en/glossary/campaign-group.md): its page has a **Limits** tab with **Budget**, **Clicks** and **Impressions** blocks.

## Troubleshooting

| Symptom | Cause | Fix |
| --- | --- | --- |
| "Specify the date" under a date | The **Launch period** block is on, but no date is selected | Select both dates or turn the block off |
| "Start date cannot be later than end date" | The **Start** date is later than the **End** date | Swap the dates |
| "The total limit must be greater than zero for even distribution" | **Evenly throughout the period** is selected, but the **Total** limit in the **Budget** block is not set | Set the **Total** limit or select **As fast as possible** |
| "Broadcast range must be set" | **Evenly throughout the period** is selected, but the **Launch period** block is off | Turn on **Launch period** and set both dates |
| "You cannot save an impression limit for this campaign." | The campaign is in the Pop format, and the **Impressions** block has values | Turn off the **Impressions** block. To limit volume, use the budget or the frequency cap per user |
| The campaign stopped running early, and the dot next to its name is green | The budget, click or impression limit is used up. A used-up limit does not turn the dot off | Hover over the speedometer icon in the campaign list and check which limit is used up. Increase it |
| The dot next to the name is gray | The campaign is outside the launch period or schedule, or the balance is $10 (€10, RUB 1,000) or less | Check **Launch period** and **Scheduler**, top up the balance |
| The amount in a budget field changed by itself | The minimum amount is 0.1, with one decimal place allowed | Enter an amount of at least 0.1 |
| The schedule shifted by several hours | The grid is shown in the selected time zone. The platform stores hours in UTC and converts them | Select the right **Time zone** before marking hours |

## Next steps

- [Set up campaign targeting](./targeting.md).
